Skip to content

Cart

 

Get a €5 beauty bonus

Sign up for the newsletter and get €5 off your first order of at least €49 – plus new products, special offers and expert tips for your studio.

Russian Volume vs. Mega Volume: Everything About Volume Fan Techniques

Yasemin Dursun

With volume sets, every base determines how uniform the lash line appears. Russian Volume Lashes and Mega Volume Lashes use several fine fibers on a single isolated natural lash each. Russian Volume offers you plenty of room for soft, fanned-out looks. Mega Volume aims for a particularly compact, dense appearance and typically uses more very fine fibers per fan. For planning, fiber thickness, length, fan width, and the natural lash the fan sits on are important.

Russian Volume Lashes: Shaping Fans by Hand

In the typical Russian Volume technique, you open several extensions with tweezers and shape a single, narrow base. You distribute the tips according to the desired finish. A uniformly open fan creates a soft contour. A tight fan bundles the tips and can emphasize a defined zone in the mapping.

The advantage of a handmade fan lies in its customization during the treatment. You can vary the number of fibers along the lash line and work with more compact, shorter fans in the inner corner. In the center or outer area, you can differentiate the desired shape through length and openness. Align your selection with the growth direction and the strength of the individual natural lash.

What Do 3D, 5D, and 8D Mean?

The number indicates the number of fibers in a fan. 3D means three, 5D means five, and 8D means eight. Two sets with the same D-number can look significantly different. An open 5D fan distributes its tips more widely than a tight 5D fan. On a lash line with many well-covered natural lashes, the same fans can look denser than on a lash line with larger gaps.

Mega Volume Lashes: Creating Density with Very Fine Fibers

Mega Volume often uses higher fiber counts and very fine diameters. The terms overlap in the market, and the transition depends on the planned design. For a dense contour, you can work with evenly aligned tips and coordinated lengths. A uniform start is created by distributing the fans and placing them on the individual natural lashes.

Plan a dense look across several zones. First, determine where the silhouette is highest. Then, decide how you will transition between short and long sections. Especially with high fiber counts, it is worth considering the lash layers. An upper layer can use a different length than an underlying layer so that the tips lie on the desired line in the overall picture.

Which Thickness Is Right for Volume Fans?

As a guide for material selection, you can compare diameters such as 0.05 or 0.07 mm for fans with a moderate number of fibers. For fans with a higher fiber count, finer diameters such as 0.03 mm are often suitable. These values are examples for getting started with the comparison. The decision for each natural lash also depends on length, material, fan base, and the starting situation. Therefore, a D-number alone does not provide a weight clearance.

An individual 0.07 mm fiber has almost twice the cross-sectional area of a 0.05 mm fiber, assuming an ideally identical cross-sectional profile and length. This explains why even small differences in diameter add up in a fan. The actual fan weight also depends on taper, length, material, and base. For concrete comparisons, refer to the manufacturer's specifications and assess the load-bearing capacity of the individual natural lash.

How to Plan Different Fans for a Set

  • Inner corner. Plan short transitions and choose a base and fiber count suitable for the often finer lashes there.
  • Center. Depending on the eye shape, decide whether you want more openness, length, or an emphasized tip line here.
  • Outer corner. Check the growth direction and condition so that the transition supports the planned silhouette.
  • Refill. Check the existing start and the current natural lash inventory. Choose the variants again for the lashes you will cover at this appointment.

Premade Volume Fans in a Volume Set

Premade Volume Fans are already opened fans with a finished base. You save the step of fanning them out and can prepare variants for a recurring mapping. When selecting, compare the base shape, openness, and curl specification. A finished fan with a similar fiber count may take and align differently depending on the base.

When combining handmade and premade fans, a common goal for the contour helps. Place both types side by side under your work light. Check how the tip height and fan openness relate to each other. This allows you to use a premade fan where it fits the transition and to fine-tune individual areas with handmade variants.

What to Document for the Next Appointment

Record curls, lengths, thicknesses, and noticeable zones in the mapping. A short note about the finish also helps, such as "soft tip line" or "narrow fans on the outside." At the follow-up appointment, you can check how the set wore and which parts you would like to repeat with a similar starting situation. The common foundation for classic sets and volume is clean eyelash extensions with individually isolated natural lashes.

Example of a Soft Volume Mapping

If you want to open up the center, place the longest section there and work with graduated lengths on both sides. Compare the silhouette by checking from the front and from a flatter angle. Pay attention to the tip line and how the fan widths transition into each other.

For a denser look, while keeping the length the same, first check the fan openness and the distribution of the fans. A narrower opening bundles the tips. If you are working with two variants, note where the change becomes visible. This helps you to place the transitions precisely at the next refill.

Discover fine extensions and premade fans at CFB Cosmetics® and put together your volume selection.

Read more

Blog

The right eyelash adhesive: quick-drying, sensitive or hypoallergenic?

Compare quick-drying, sensitive, and UV eyelash adhesives. Find the right setting time and formula for your studio workflow.

Read more
Blog

Eyelash Extension Accessories: What Should Be in Your Basic Kit?

From lash organizer to remover. Use this checklist to find out which accessories you need for preparation, application, and refills.

Read more